Xcem offers a convenient and ready to use Trycem NE, for quick temporary cementation of crowns and bridges. The composition is based on Zinc oxide/non-eugenol system.
INDICATIONS: For temporary cementation of crowns, Bridges and inlays etc. Also useful as temporary material. May be used to find high spot on dentures.
PRESENTATION:
Base: 3ml Paste/ 25 ml tube
Catalyst: 3ml Paste/
25 ml tube
Recap able tips.
Mixing Pad
READY TO USE: Working time: 2 minutes.
SET TIME: 3.5minutes from start of mix.
HOW TO USE: Dry the crown and load fitting surface with Trycem NE as required and fit on tooth. Trim excess. The non-eugenol component has a soothing effect on pulp.
Trycem NE has a very low film thickness, therefore it is ideal cement for allowing complex crowns and bridges to allow settle onto teeth.
Spatula and instruments should be wiped clean before setting.
Spillages must be cleaned immediately.
In case of contact with skin, wash with plenty of water.
If contact occurs with eyes use eye washer if necessary.
Medical advice may be sought if necessary.
Please do not use Trycem NE under composite restorations as it Retards setting.
STORAGE: Store at normal room temperature in sealed form